We seal the grilles

Many people in the gardens or in the dachas have plague lattices or special grilles on the soil, covering the hole of the well. Over time, they begin to shatter. In this case, it is necessary to make repairs to strengthen them. You can order grilles and other metal structures by contacting Remstroymet, more.

To start strengthening, you should wait for warm dry weather. Moisture and plant seeds can easily penetrate into the resulting cracks and lead to destruction between the foundation of the house and brickwork. And if the seeds give out seedlings, then most likely the volume will also be destroyed.

Slots can be cleaned in two ways. It will take a lot of time if you clean it with a knife and brush, it will turn out much faster if you use a waterfront apparatus.

You can not start repeated cementing until the cracked remnants of the old. This can be done using a chisel or screwdriver, but perhaps you will need another hammer and chisel so that damaged pieces of old cement is easier to break. If the base of the lattice has a dry, strong, smooth base, then strengthen it with epoxy putty or two -component glue. But if you moisten cemented elements with water, then you can use a solution of cement.

Next, wet the tiles with water and begin to lay on a wet base. Also, do not forget to moisten those tiles on which the grill will be installed. Now it is necessary to pour dry adhesive powder on a wet layer of cement, then start laying the tile. Further, it is recommended to apply glue dough evenly on the surface with a thin layer. By the way, it is very important that you use only those types of cementing solutions that are resistant to frost for external work.

The tile should be laid in the same place, moving it a little in different directions. The position of the grate must be determined by the level — it must also be installed in the same place. By the way, it may be that, due to the negligence of the installation of the grate, it began to loosen, it was simply necessary to close the seams with epoxy putting the seams or better with epoxy putting down.

Read also:

Меню