Types of AS-AOG devices

AS-AOG-01M+ execution «B»

The parameter registrar and coordinate protection are built into the AS-AOG system. Most often, this system is mounted on automobile hydraulic cranes, which have a simple control system. In this system, the communication channels of almost all types were used: wireless and wired, digital and analog. Thanks to the skillful use of complete galvanic denouement from the side, the highest noise immunity is guaranteed. Deformations of the loading mechanism are calculated as exactly as possible thanks to components from well -known manufacturers. Forget that during the settings you performed a huge number of adjusting operations; Special mathematical support saved the device from this problem. The device is easily attached to any surface with a size of 85×60 mm; The device is located on a special bracket, which easily rotates in different directions.

AS-AOG-01M+ execution «g»

This device was created to work with any lifting mechanisms; It differs in that it has a large set of various operating modes and easily copes with the most complex systems. The denouement of all the circuits of the system is implemented from the side, which ensured the guaranteed level of noise immunity. The automatic load capacity processes a huge number of signals. That is why it was decided to create a system of two separate blocks — the control unit and the signal unit. A special block has been installed, which was created exclusively for working with electrical control systems. The amount of memory is increased, information read information is possible via Flash-Card and a standard USB port. The device is completely turned on in about 10 seconds.

AS-AOG-01M+ execution «Combi»

This system is usually used on complex lifts in situations when it is necessary to conclude a control panel and a security system in one case. The system is turned on using a mark key. Having calculated the azimuth of the rotation of the moving platform and the weight of the cargo can easily determine the area of ​​permissible values ​​of the height of the rise. If you have special requirements for functionality and layout, then implementation is possible, it is not necessary to buy a standard device. Technical characteristics are similar to the automatic loading restricted AS-AOG-01M+ “B”.

Read also:

Меню